API 5L Pipe Line, Oil & Gas Line Pipe
1. Out diameter: 114.3mm – 660.4mm (4″-26″)
2. Thickness: 3.0-20.0mm
3. Length: 3m-18m
4. Type: ERW (Electric Resistance Welded) Steel Pipe, HFI (High Frequency Induction) Steel Pipe, HFW (High-Frequency Welding) Steel Pipe
5. Standard: API 5L(ISO 3183) PSL1/PSL2: GR.B-X80, GB/T 9711.1, GB/T 9711.2, ASTM A53: GR.A/GR.B, ASTM A500: GR.A/GR.B/GR.C/GR.D, ASTM A252: GR.1/GR.2/GR.3, EN10219/EN10210: S275/S355JRH/J0H/J2H, AS/NZS 1163
6. Uses: Welded steel pipes for use in pipeline transportation system in the petroleum and natural gas (oil & gas) industries, water pipeline, structural & construction.
7. Chemical Analysis (%):
| Estándar | Tipo de tubería | Clase | Calificación | do
máximo |
Y
máximo |
Minnesota
máximo |
PAG
máximo |
S
máximo |
V
máximo |
Nótese bien
máximo |
De
máximo |
| API Spec 5L
/ISO 3183 |
SOLDAR | PSL1 | L245 B | 0.26 | – | 1.2 | – | 0.03 | 0.03 | – | – |
| L290/X42 | 0.26 | – | 1.3 | – | 0.03 | 0.03 | – | – | |||
| L320/X46 | 0.26 | – | 1.4 | – | 0.03 | 0.03 | – | – | |||
| L360/x52 | 0.26 | – | 1.4 | – | 0.03 | 0.03 | – | – | |||
| L390/x56 | 0.26 | – | 1.4 | – | 0.03 | 0.03 | – | – | |||
| L415/x60 | 0.26 | – | 1.4 | – | 0.03 | 0.03 | – | – | |||
| L450/x65 | 0.26 | – | 1.45 | – | 0.03 | 0.03 | – | – | |||
| L485/x70 | 0.26 | – | 1.65 | – | 0.03 | 0.03 | – | – | |||
| PSL2 | L245M/GR.BM | 0.22 | 0.45 | 1.2 | 0.025 | 0.015 | 0.05 | 0.05 | 0.04 | ||
| L290M/X42M | 0.22 | 0.45 | 1.3 | 0.025 | 0.015 | 0.05 | 0.05 | 0.04 | |||
| L320M/X46M | 0.22 | 0.45 | 1.3 | 0.025 | 0.015 | 0.05 | 0.05 | 0.04 | |||
| L360M/X52M | 0.22 | 0.45 | 1.4 | 0.025 | 0.015 | – | – | – | |||
| L390M/X56M | 0.22 | 0.45 | 1.4 | 0.025 | 0.015 | – | – | – | |||
| L415M/X60M | 0.12 | 0.45 | 1.6 | 0.025 | 0.015 | – | – | – | |||
| L450M/X65M | 0.12 | 0.45 | 1.6 | 0.025 | 0.015 | – | – | – | |||
| L485M/X70M | 0.12 | 0.45 | 1.7 | 0.025 | 0.015 | – | – | – | |||
| L555M/X80M | 0.12 | 0.45 | 1.85 | 0.025 | 0.015 | – | – | – |
Propiedades mecánicas
| Estándar | Clase | Calificación | Yield Strength (MPa) | Tensile Strength (MPa) | Alargamiento (%) |
Y.S/T.S | |
| API SPEC 5L /ISO 3183 | PSL1 | L245/Gr.B | mínimo | 245 | 415 | b | – |
| L290/X42 | mínimo | 290 | 415 | b | – | ||
| L320/X46 | mínimo | 320 | 435 | b | – | ||
| L360/x52 | mínimo | 360 | 460 | b | – | ||
| L390/x56 | mínimo | 390 | 490 | b | – | ||
| L415/x60 | mínimo | 415 | 520 | b | – | ||
| L450/x60 | mínimo | 450 | 535 | b | – | ||
| L485/x70 | mínimo | 485 | 570 | b | – | ||
| PSL2 | L245N/BN
L245M/BM |
mínimo | 245 | 415 | b | – | |
| máximo | 450 | 760 | b | 0.93 | |||
| L290N/X42N
L290M/X42M |
mínimo | 290 | 415 | b | – | ||
| máximo | 495 | 760 | b | 0.93 | |||
| L320N/X46N
L320M/X46M |
mínimo | 320 | 435 | b | – | ||
| máximo | 525 | 760 | b | 0.93 | |||
| L360N/X52N
L360M/X52M |
mínimo | 360 | 460 | b | – | ||
| máximo | 530 | 760 | b | 0.93 | |||
| L390N/X56N
L390M/X56M |
mínimo | 390 | 490 | b | – | ||
| máximo | 545 | 760 | b | 0.93 | |||
| L415N/X60N
L415M/X60M |
mínimo | 415 | 520 | b | – | ||
| máximo | 565 | 760 | b | 0.93 | |||
| L450M/X65M | mínimo | 450 | 535 | b | – | ||
| máximo | 600 | 760 | b | 0.93 | |||
| L485M/X70M | mínimo | 485 | 570 | b | – | ||
| máximo | 635 | 760 | b | 0.93 | |||
| L555M/X80M | mínimo | 555 | 625 | b | – | ||
| máximo | 705 | 825 | b | 0.93 |
